Toolshaven is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

How to Use a Spindle Sander: 5 Easy Steps

Triton TSPS450 Oscillating Spindle SanderFor making the sanding process rather easy as well as efficient, a spindle sander is a must. Especially, it is designed to sand the edges of the woods. It will help you to achieve the curved shape of the pieces of wood.

The good thing is, you don’t have to collect the sandpaper for manual sanding, as it is already covered by sanding sheets. As a result, you can get a smooth finish with ease. The oscillating process and the up and down movement is actually the unique working style of a spindle sander that makes it highly efficient.

Whatever you are an inspired novice or a professional, the write-up about how to use a spindle sander is going to help both. Stay tuned with us until the end to get all the pieces of information on your hands.

Why a Spindle Sander Use for?

It is an essential tool that can be used for a couple of tasks. Basically, it is used to smooth out the rough edges for getting the final finish. The fact is, it has got a rotating drum, which creates an up and down movement for making it ideal to sand inside the curves.

If you’ve some odd angles, then you must give your hands on a spindle sander to make it appropriate. For getting a sleek finish, top spindle sander has no other alternatives!

Step by Step Guide on How to Use a Spindle Sander

WEN 6510T 3.5 Amp Oscillating Spindle Sander

Here, we are going to elaborate on everything about using a spindle sander. Give your hands on the guideline to know the Each And Every part:

Step-1: Prepare Everything

Before move on to the using rules, make sure to begin by collecting the necessary pieces of equipment, and then prepare the working area. Moreover, you need to ensure that you have adequate spindles on your hand. It should be perfect in terms of size. This is also the stage where you have to arrange the safety clothes (we will talk about it later in the F.A.Q section).

Step-2: Give a Mark on the Work Piece

Before starting the sanding process, make sure to mark the piece of wood that you are using. By this, you can identify the circumference and even the depth also. Do not just rely on your naked eyes, whereas it is a kind of task that should be accurate.

If you somehow forget to give a mark on the workpiece, the entire work seems to be poor! As a result, you may have to end up with an inaccurate job.

Step-3: Pick Out the Perfect Drum Size

You have already known that a spindle sander has got numerous sizes of the drum. The rotating drum is known as the summary of a spindle sander. At first, you need to get the right measurement of the curves so that you can select a rotating drum with the right diameter.

A measuring tape (or whatever for measuring) is the best idea to identify the accurate measurement. In a general way, you may start the process of sanding by picking out a smaller drum instead of choosing a bigger one (especially if you’re a beginner).

Step-4: Attach Sanding Sheet If Not Included

If your drum has no sandpaper included, then make sure to collect sandpaper and attach it. Further on, you have to choose the perfect size along with the right grit.

Step-5: Let’s Begin The Sanding!

After completing the task of preparation as well as setting up all, it is time to move on to the real action! Remember, you cannot even accomplish the task within a snap, you have to be patient and aim to do it slowly and smoothly as well.

It is prohibited to push a lot of pressure on your spindle sander. So, make sure to stay away from pushing. Allow the rotating drum to do the job by itself. Again, don’t force! All you need to do is keep up the piece of wood in one direction. You have to hold it until you see it reaches on the mark that you have provided earlier.

Then, change the direction when you see it reaches to the borderline of the mark. Make sure that it creates an equal edge on each and every side. Take as much time as possible to make the job perfect!

FAQs

What are the safety tips of using a spindle sander?

Without proper guidelines for using this type of power tool, you may have to face accidents and internal damages. Make sure to follow the tips below:

  • At first, you have to pick out the safety equipment like goggles, hand gloves, safety glass, and the dust musk.
  • Before beginning the sanding process, you have to ensure that the dust collector is ‘ON’ mode.
  • Avoid the kinds of dresses that are loose enough. Stay away from the long sleeve shirts as well as wearing the ornaments during the working period.
  • Check out the whole spindle sander to make sure that there are no scrap pieces left between the sander and the table.
  • Keep your fingers at least 1-inch away from the sander.

Which one is the best spindle sander in overall?

Indeed, the market is loaded with a variety of spindle sanders that can offer a significant job. According to our research, Triton TSPS450 Oscillating Spindle Sander can be an ideal choice that we tested, as it has got some useful features and some great customer ratings at the same time.

Can you get any replacement parts of a spindle sander?

In a short reply, yes. However, you can check out your nearest local shops to ensure that there have replacement parts of the brand that you are using.

For using a spindle sander, is a dust port necessary?

Of course! It is designed to provide you a mess-free surface while working out. This will help you to reduce the dust or debris from the work area.

Can I get a spindle sander at a cheap rate?

Definitely, even the market has got a couple of spindle sanders at a reasonable price tag. We suggest giving your hands on the WEN 6510 oscillating spindle sander if you’re on a tight budget!

Wrapping Up

This was the write-up about how to use a spindle sander. Not only we’ve included the way of using it, but also we have elaborate on some more informative things to let you know about a spindle sander in detail. Hopefully, you have enjoyed it!

New from the blog:

How to Use an Electric Sander?

 

About David S. Miles

David S. Miles

David S. Miles is the Editor at toolshaven.com. He has been working as a professional pro woodworker with over 10 years of experience. Now he is researching power tools/saws and sharing his opinion to help readers. Find him on twitter here. Happy reading!

Related Articles

Leave A Reply