How to Clean a Table Saw Blade – 5 Easy Steps

If you have a tool at home and use it regularly, it will still get dirty. Table saw blades are no exceptions to this rule. The saw blade can get dirty by being burnt on sawdust and can lead to poor performance. Moreover, dirty saw blades can bring you harm even if the work is slight.
So now you must be asking how to clean a table saw blade, right? This process of cleaning the table saw blade is quite simple and it does not require the use of complex cleaning products. So, here is a thorough look.

Learn How to Clean A Table Saw Blade Following 5 Easy Steps

How to Clean A Table Saw Blade

Follow the steps below and you’ll be able to clean your table saw blade in no time.

Step 1: Detaching the Blade and Immerse

As the step suggests, you need to detach the blade from your table saw. When you are done detaching the blade, you need to put it inside an aluminum pan. After that, you have to immerse the blade completely inside the water. Now, you can put a bit of laundry detergent inside.

A blade can get dirty in a short span of time. If it becomes really dirty, you will need to remove its heavy dirt by using a steady brush. You can do the job better if the brush is made with wire. Now, you can put the blade inside the water to clean it quicker.

Step 2: Stirring and Waiting

For the very next step, you need to stir the aluminum pan and then wait. If you have already mixed the detergent with the water then there is nothing left to do but stir the water. Now, you should keep the blade in this state for 10-15 minutes. You can begin working when the aforementioned time has passed.

One way to stir this liquid without causing any trouble is to place your finger inside. You should be able to find a hole inside that resides at the blade’s core. Now, you can rotate the blade so that it remains in a circling state. You can also take the help of a brush to complete this step.

Furthermore, you need to keep in mind that the teeth of saw blade is capable of hurting you. You should keep it away from the power socket. In addition, make sure you have stirred the liquid before you dip the blade inside.

Step 3: Scrubbing the Blade

This is the right time for you to eliminate all of that dirt from your blade. If you want to know how to clean a table saw blade properly, then you need to pay a lot of attention to this part. At first, you have to get a wire bristle to begin the scrubbing process. If you don’t have that, you can also use a plastic brush to achieve the same effect.

However, if you are the type of person who likes to execute everything properly then you need something else. The one cleaning equipment that is perfect for this job is a brass brush.

When you scrub the blade, it allows you to get rid of sticky dirt as well. So, your blade is bound to become sharper than before. As a result, the table saw blade will look and perform as good as the first time you bought it.
With that said, you need to be cautious throughout the entire step. After all, the dirt cannot take away all of the sharpness from the blade. You should do anything and everything to avoid getting cut anywhere on your body. The best way to ensure your safety while cleaning is by wearing gloves.

This is the most important part of learning how to clean a table saw blade. If you miss out on any part then it result in a faulty cleaning job. So, all your effort will amount to nothing. On the flip side, if you go through this part with a lot of focus, you can get your table saw blade to top shape in no time.

Step 4: Let it Dry

Now that you have removed all of that dirt, it is time to just let it dry. After all, it is not safe to keep the blade in a wet condition. When you let steel stay wet for a small amount of time, the substance begins to form rust. The same can be said for your blade.

You need to make it your number one priority to dry the blade right after you have washed it. Keep in mind that you need to let it dry completely otherwise rust will form on the blade.

When you wash the blade, there is every chance that the water gets stuck in the middle of the crannies and its teeth. You shouldn’t panic in a situation like this as all hope is not lost. All you have to do is blow-dry the blade to some extent. This is the most secure way of drying the blades.

Step 5: Reinstalling the Blade into Position

If you want to know how to clean a table saw blade, you need to learn how to properly reinstall it too. You can check out iwoodcutters to learn how you can properly plug it back into its power socket. This will make your table saw blade well-prepared to take on a new task.

Final Words

When you clean the table saw blade, the overall performance is bound to improve. In fact, it ensures that the cuts are clean and super smooth at the same time. Moreover, you need to clean the blade as many times as you can.
When you learn how to clean a table saw blade once, you can do it quicker the very next time.

You need to use this to your advantage and clean the blade before any thick residue starts forming. Keep in mind that the blade generates heat and makes the residue sticky as well.

At the end of the day, this process is going to expand the lifespan of your table saw blade.

New from the blog:

Different Types Of Table Saws & Uses (With Pictures)

Track Saw vs Table Saw – Which is Better for You?

About David S. Miles

David S. Miles

David S. Miles is the Editor at toolshaven.com. He has been working as a professional pro woodworker with over 10 years of experience. Now he is researching power tools/saws and sharing his opinion to help readers. Find him on twitter here. Happy reading!

Related Articles

Leave A Reply