ToolsHaven is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you.

13 Useful Pole Saws Maintenance Tips

By: David S. Miles | Last Updated: January 13, 2024

If you want to keep the pole saw in good condition and extend its lifetime, you need to maintain the bar saw timely and adequately. While many manufacturers include the maintenance guideline in the user manual, knowing the practical and useful maintenance tips for pole saws will help you better with the purpose.

We have gone through several user manuals and took expert opinions to prepare the maintenance guideline. So, it will be beneficial for a pole saw users.

Maintenance Tips for Pole Saws

A Pole Saw

When it comes to maintaining a pole saw properly, it includes periodic and regular maintenance. It consists of the following steps.

Before Using the Pole Saw

When you purchase a pole saw from the market, you shouldn’t use it directly to cut and prune trees and shrubs. Instead, it is admissible that you prepare the saw for convenient use. These pre-flight tips on the pole saw maintenance is crucial for safety.

1- Check all the nuts, bolts, and connections and make sure these are securely tightened. It is a must-do step since any loose competent may bring hazardous results during the cutting and pruning time.

2- Sometimes the pole saw chain may be damaged or have broken links. Both conditions are harmful to the safety and smooth operation. So, check for such imperfections and repair them immediately if found.

3- The trigger and trigger lock feature securely holds the blade in its position and lets you control the machine. You should check that the trigger lock is functioning correctly, and it didn’t stick in the middle of use.

4- You will have to check for the air filter in case you are using a gas-powered pole saw. Sometimes, the air filter is clogged with debris and results in inferior cutting experience. So, make sure the filter is clean or replace it if necessary.

Lastly, check that the fuel pipe isn’t leaking. For corded electric pole saw, ensure that the cord is connected securely with the power outlet.

After Using the Pole Saw

These maintenance tips for pole saw will help you to clean and store the device after each application. The tips include:

1- The pole saw blade would get dirty due to the particles coming out from the cut materials. So, you need to use a rag to wipe out the debris and dust from the pole saw blade and other parts carefully. However, wait for a few moments before you start cleaning the bar saw blade. It will allow the saw blade to cool down and prevent burns on hands.

2- Also, carefully clean the protective cover of the saw. It is vital to keep the pole saw in good condition.

3- Once you have cleaned the pole saw adequately, store it in a safe place. You may lubricate the blade so that it doesn’t get dull.

Periodic Maintenance Tips

You also need to adhere to some weekly and monthly maintenance tips for the pole saw application. These broadly include:

1- Always check the lubrication oil level of the pole saw. If the lubrication or engine oil is below the optimal level, quickly refill the tank.

2- Sometimes the blade will get dull due to overuse of the pole saw. If it happens, use a file or sharpening rod to sharpen the saw pole blade. It will help the edge perform smoothly.

3- If you are ardently using an electric pole saw, check the power outlet connection for proper functioning.

4- Also, check the spark plug so that it doesn’t contain any leaks and imperfections.

5- Finally, check the filter and remove any debris if it is clogging the filter.


Maintaining a pole saw is relatively easy. Once you can follow these maintenance tips for pole saws, you should be okay with the saw for a prolonged period. Also, check the user manual for any additional maintenance if necessary.

Lastly, wear protective goggles and gloves when you prune and cut tree branches with the pole saw for safe applications.

Related Articles

2 thoughts on “13 Useful Pole Saws Maintenance Tips

  • This design is steller! You obviously know how to keep a reader entertained.
    Between your wit and your videos, I was almost moved to start my own blog (well, almost…HaHa!) Fantastic job.

    I really enjoyed what you had to say, and more than that, how you presented it.
    Too cool!

  • Thanks for the info about pole saws. A friend of mine is thinking of having a power pole installed. I’ll share this info with him as he looks for a contractor that can help install a pole.

Leave A Reply